Get your {Hookah} shaft lengthened

DIY Hookah Shaft & Diffuser

This should be quite simple, along the lines “one picture is worth 1,000 words”. A diffuser is something that breaks a gaseous or smoke material such as the shisha you have in your tobacco bowl and into the metal shaft acting as a diffuser and the smoke flow  by way of bubbles through your water cooling the smoke and hence the hubbly bubbly noise. You can get even more bubbles, smaller too with less noise by making a diffuser. I have 2 large sized hookahs side by side, one with my diffuser and one without. As I listen to music and smoke, the bubble sound in the non diffuser hookah tends to drown out the sound of music. The hookah with a diffuser much less.

Here is what you need to DIY diffuser. 2,3,4or 5 plastic elbow drinking straws,the bending kind are best. Quite often the mini hookah  has a very short metal shaft.Also the  junior hookah.This diffuser is great since it will make the short shaft longer. But since the mini has such a small shaft diameter, 2 would probably be all you need.Rule of thumb,put in as many as will fit.Into my large hookah shaft at the bottom,I only got in 4.

I actually prefer cutting  the straws longer and  as you put your shaft into the water of the bowl, they splay out in all directions also sideways, something  that no plain shaft can do.

 Inside cut away view of each straw in the shaft.

You’ll find the draw a bit harder, which will create extra smoke but much cooler and quieter!

Happy smoking , don’t pull a muscle lifting those straws! This is so simple. When cleaning the shaft you can save them a few times or make new in 10 seconds.

Why get shafted? Grow yours longer.1 size straw its all.